Canadian TV, Computing and Home Theatre Forums banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
I am trying to install a 9141 and am having some issues. I have run all new cables from the sattelite, installed the SW44, made sure it was plugged in and am not getting any signal and when i do check switch it is not recognizing the SW44. It is still saying I have the SW21. When I was hooking up the cables to the LNB's I think I might have accidentally put the LNB's on the wrong sides. Would that make a difference or would it just pick up the other sattelite as long as I hook them up properly inside at the switch? What else could I check?
 

·
Registered
Joined
·
10,007 Posts
The LNBF's are identical, even if the casings look different, so it does not matter which side they are on.

Ensure that both 91 lines are on Sat 1a & 1b and that both 82 lines are on Sat 2a & 2b.

After that, ensure that Port 1 Output has the Power Inserter, hopefully that will get you going.
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top