Canadian TV, Computing and Home Theatre Forums banner
1 - 3 of 3 Posts

· Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
I had Installer come during new house rough in and he put dish on roof and ran 4 lines to my server rack and left me a box with I believe an SW44. How do I determine now what lines are connected to what LNB etc.. I have a 9241 and a standard HD reciever to connect
 

· Registered
Joined
·
4 Posts
Discussion Starter · #5 ·
Ok the 6131 worked great for identification, once I realized I had to change to specific transponders to see signal. I hooked both 91s to 1a and 1b, both 82s to 2a and 2b, Power inserter into output 1 then from power inserter to sat 1 input on 9242. Then from output 2 on switch to input 2 on 9242. Did a check switch and it seemed to be ok but gave me error about SW21. I left it on downloading guide before coming to work and will check it when I get home for lunch.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top