[Pinza]

That will do nicely, you will just need to re-aim to 91 for SD and 82 for HD. You might need a different switch, not sure what Direct use.

 

[Pinza]

Yes, that is correct.

Have a read through the Bell TV Installation thread for more details and how to do it. Telus use the same 2 birds as Bell TV.

 

[Pinza]

two LNBs housed in a single unit (dishpro)

So DirecTv also use DishPro.?

 

[Pinza]

I would suggest looking for a Dishnetwork Dish 500, then get a DPP Twin LNBF, if you are taking a 6131 receiver you will not need anything else, if you are getting a 9241, you will need a DPP Separator, and the only cable required will be 1 RG6 from Dish/LNBF to Receiver.

 

[Pinza]

The reason i suggested a Dish 500 and not a Bell branded Dish is that Bell is not officially allowed down in the States and the Dish 500 is now old technology from Dish Network, as more people are moving to the Dish 100 etc, meaning lots of cheap Dish 500's around.