Canadian TV, Computing and Home Theatre Forums banner

Designing custom antenna for my very specific local needs?

2871 Views 23 Replies 9 Participants Last post by  jflarin
This is a question to all the OTA gurus on this forum.

I would like to design custom antenna for my location,
based on the numbers given by tvfool.

The weakest channel I'd like to get is 23 (ION) and for this I'd probably need a preamp.

By looking at the tvfool chart I've come up with a list of frequencies, azimuths and target gains.

My question are:

Are the target gains enough (with /without preamp)?
Are some if target gains to much if I am to use a preamp?
Could I go with less gain on any channel?

Code:
Chan	Network	Dist	Path	NM 	azim     target gain
	        (mi)            (dB)	(deg)    (dbi)
-------------------------------------------------------
20	CBC	19.8	LOS	49.6	50	    0
18	Ind	26.2	LOS	46.7	-50	    0
40		19.8	LOS	44.4	50	    0
44	OMN	20.2	LOS	43.1	50	    0
64	OMN	20.2	LOS	41.6	50	    0
35	Ind	26.2	LOS	38.6	-50	    0
24	SRC	19.8	LOS	37.4	50	    0
32	CW	57.6	LOS	37.2	0	    0
65	GTN	19.8	LOS	34.9	50	    0
66	Sun	19.8	LOS	34.8	50	    0
53	Ind	19.8	LOS	33.5	50	    0
43	PBS	57.6	LOS	29.5	0	    1
14	Fox	57.5	LOS	24.2	0	    1
39	CBS	86.2	LOS	21.7	-5	    1
33	NBC	85.4	1Edge	17.5    0	    5
38	ABC	87.5	1Edge	12.9	-5	    8
26	Ind	87.1	1Edge	11.5	-30	    9
49	MyN	86.3	1Edge	7.7	0	    10
7	Ind	88.0	2Edge	-7.2	-10	    8
23	ION	100.2	2Edge	-13.5	10	    16
Thanks in advance,

nikiml
See less See more
1 - 1 of 24 Posts
You have three options:
1. Buy a commercial antenna like the Anntenas Direct 91XG
2. Build an antenna like the DBGH or M4.
3. Do the work to design one your self.

Note: many antennas a optimized for the new reduced UHF band which may make getting channels over 51 more difficult than TVfool indicates. You will probably also need a rotor unless the CN tower is in line with the Buffalo stations.
1 - 1 of 24 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top