Code 015

11462 Views 9 Replies 5 Participants Last post by Pinza, Nov 10, 2010

cndpokerdude

Discussion Starter · Nov 9, 2010

Newbie here,
Woke up Sunday to watch football, turned on TV saw this code. No storm etc and now it`s been over 24 hours.
Transponder keeps searching, not detecting any switches. I have dual lnb with SW44 hooked up to 2 tvs and receivers, one HD and one standard. Everything worked fine Saturday.

Any help would be great without having to pay $75 for a tech to show up and charge me to change my SW44 if that happens to be the problem.

Thanks

Save

1 - 4 of 10 Posts

Pinza

· #3 · Nov 9, 2010

Error 015 is loss of signal.

With an SW44 setup, the first thing I would check is the Power Supply and Power Inserter, ensure the lead is secure in the inserter and that the Power Supply is warm to the touch, ie; has a hydro feed.

And if you pay $75 for a Service Call, that DOES NOT include a replacement SW44, that is an extra $150.

Save

Pinza

· #6 · Nov 9, 2010

Depending on your receivers I would be looking at getting a DPP Twin LNBF and forget the SW44 anyway.

Save

Pinza

· #8 · Nov 9, 2010

The design of the connection between the Power Supply and Power Inserter is the worst thing I have ever seen. If it is not twisted correctly, it can pop out almost at will. I know of hundreds of Service Calls, just to re-connect that little plug and almost as many, to plug the Power Supply back in.....lol

Save

Pinza

· #10 · Nov 10, 2010

Just double check the cable ends before you spend money on a new one.

Save

1 - 4 of 10 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month