[Ykdave]

Check the early posts of this thread. Especially post 28?

Been there done that, like I said, tried several addresses and nothing is working for uhf.

I don’t even think the remote address would make a difference as the uhf only has 2 options and they are changed with a switch in the back of the remote

 

[DarkCanuck]

Does anyone have any more Denon remote control codes for AV Receivers. I 've tried all the one in the manual and a few more I found on line. But have yet to find one that works. My receiver is a Denon AVR-S540BT. Thank you.

Did you ever figure this out? I just picked up the same receiver and can't for the life of me figure out the code.

 

[Kingclancy]

Did you ever figure this out? I just picked up the same receiver and can't for the life of me figure out the code.

Sadly , I have had no success in finding a code that works.

 

[jdevlin]

I know you can program the AUX button to operate a second bell receiver but I can't find it in the 34 pages of this thread. Can't someone point me to the post with that info. thanks

 

[cslusarc3]

I have a rental 9400 HD-PVR and a couple of buttons on my 5.4 IR remote are not as sensitive as they once were. At one time Bell covered remotes under its rental warranty. Does Bell still cover replacement remotes for rental receivers like it did years ago?

 

[GaryMoon]

I bought a TCL Roku TV and have Bell satellite receiver 6500 with its Slim Remote. I found 4 Bell codes to program the slim remote for TCL TV but none have worked. Neither Bell nor TCL are any help. Has anyone had success in getting the slim remote to work with TCL Roku TV?

 

[Dr.Dave]

I bought a TCL Roku TV and have Bell satellite receiver 6500 with its Slim Remote. I found 4 Bell codes to program the slim remote for TCL TV but none have worked.

Here are the instructions for the slim remote: https://support.bell.ca/_web/guides...7500/Bell_9500_7500_Slim_remote_EN_2_2022.pdf

It sounds like you were trying to use the codes for the old remote. TCL isn't listed as one of the brands, so you'll probably have to use 0001 and let it search for up to 15 minutes. You could try 0010 for Insignia first, since they also made a Roku TV that might use the same codes.

 

[ExDilbert]

I haven't tried it but it might be possible to control the receiver using the TV remote for some operations. Watching the receiver might be available as an icon on the Roku main menu.