[ryanelk]

I currently have a 2 - rg6 to the dish with a y yoke adapter. There is nothing connected to the 82 side. both rg6 are connected to 91 dual lnb and i have a second lnb not connected. I would like to add a hd 6100 without the addition of running more rg6 to the dish. A list of components and maybe a diagram would be awesome. Thanks for the help.

 

[Pinza]

You would use 1 of the lines from the existing LNBF and a new line from the other LNBF, feed BOTH into an SW21, the resulting output would then be connected to the line you removed from the working LNBF. This will then give you 91 & 82 on this line to feed your 6100.

I am guessing you want to replace an existing SD Receiver with the 6100. If you want to add a 3rd receiver, you will need to run more lines, or invest in a DPP LNBF and a DPP44, check existing threads for this info.

Bell TV will do this for you free if you have not yet activated the 6100, as far as I know.

 

[angus.black]

There is a diagram in the third post in this thread.