Canadian TV, Computing and Home Theatre Forums banner

830 PVR Discussions

41369 Views 253 Replies 41 Participants Last post by  P2B
This morning I connected my brand-new (not refurbished) 830. I got a 60 Hz slight hum from my TV set after I powered up the 830. I have never had that problem with anything I've connected to the TV. I guessed that it was a ground-loop problem so I plugged the TV into the same power bar as the 830. End of problem. Shaw Direct may wish to consider that if a customer calls in with that problem.

I expected drama, based on my previous refurb 630 problems. Nope, the activation went without drama. :) I really like the new guide that provides show Season# and Episode#.

My only little quibble is the connection instructions that came in the box. It says not to press any buttons until the "blue light" goes off and the 830 restarts. It never happened; all it needed was a refresh.

As a side note, the problem with my now going-to-the-dump 630 was that only WGN acted as if it was not subscribed although I have always been subscribed. My 600 continued to receive WGN. I went thru hoops with Shaw Direct and finally most of the channels on the 630 disappeared. That's it! Warranty or not, I don't want to fool with another 630 refurb so I ordered the 830. Glad I did.

Another side note, the online MY ACCOUNT does not show WGN as being subscribed. My wife told me NOT to call or CHAT Shaw about it. Don't fix what ain't broke.
  • Like
Reactions: 1
1 - 5 of 254 Posts
I gather you are saying the internal HD is hinting. If that is the case adding external probably won't solve the problem as I believe they work in tandem.
I just “upgraded” to a 830 from a 630.
On the 630 I had an external hard drive hooked up from the esata port on the 630 to the esata port on the hard drive. On the 830 there isn’t an esata port, but there is a usb. Can someone confirm an eSATA to USB cable would work? Thank you.
You don't seem to be getting an answer. Since they say USB2 or USB3 I imagine since esata is faster than usb2..a cable should work.
Reenter I believe. I took pics of the screens to do similar.
  • Like
Reactions: 1
My guess is "Shaw Direct programmers" did not do that code.
  • Like
Reactions: 1
But but but there are places you don't want to................................
  • Like
Reactions: 2
1 - 5 of 254 Posts
Top