9241 Internal hard drive replacement
Apologies if this has been discussed elsewhere, but I can't find it.
The 9242 hard drive replacement thread at http://www.digitalhome.ca/forum/showthread.php?t=103462 has been invaluable, with its list of valid replacement drive numbers, etc. However, it doesn't specifically address the 9241 (altho some 9241 owners have posted there). The 9241 owners thread makes some references to hard-drive replacement, but I can't find concrete details.
Does someone have a list of drive models that make suitable models for replacement in a 9241? Or have any experience with this?
I've seen ebay postings for 9242 drives, saying they will work in 9241s also - but I'm suspicious of that - esp after reading the 9242 thread. I've also seen lots of 9241s that can't be activated going on ebay, and was thinking of buying one of those so I can cannibalize the hard-drive when needed.... but I also recall reading somewhere (not sure where now) that a 9241 can only have its hard drive replaced by the EXACT same model that it already has. ie, even a different model drive from a different 9241 may not work in my unit.
Does anyone know if there is any truth in either of these statements?
For the record, my 9241 is humming along nicely in the 6 months six I got it (from ebay - who knows what it did before then!). But I know these drives get harder to find and would like to have an "insurance" drive around, as I hope to keep the receiver for a long time! (Changing receivers down "south" is a pain, and my 5100/5900 only lasted two years!)
The most up-to-date list specifically for the 9241 that I've seen is "V232 HDD list for 9241 [a la ViP612]" from August 2009. Firmware is now V238. I think the new firmwares add drives rather than remove them, but the problem is actually finding one of those old ones. There are a few sites that claim to have some of the Seagate models that are on both that list and the 9242 list. You have the advantage with a US shipping address.
eBay/PayPal are very buyer-centric these days so if the listing specifically claims it works in the 9241 you should be able to get your money back if it doesn't, though you may have to return it on your own dime.
V232 HDD list for 9241 [a la ViP612]
Tue Aug 11 12:30:54 2009
NOTE: WDC disks with -57 prefix are OEM !
Please note - I'm not guaranteeing any of these disks will work in your 9241, or that you can buy them anywhere! Just trying to collect relevant info at this stage.
If anyone has had success with any of these, or other drives, please let us know!
So, given there is a whole list of suitable drives (above), then any drive that is currently installed in an operating 9241 should also work in mine? With 9241's that cannot be activated going for $50 on ebay, maybe that is a better way to go? OK, the drive won't be "new" - but it will presumably still be pretty new, and there is no doubt that it will work in my 9241... when the day comes that my original drive gives it up??
If I were buying a drive I would definitely test to see whether it worked before storing it away. The "dismantling" only involves removing 4 screws since you won't be removing the existing drive from the cage.
Just thinking about it logically, there would be no reason for anyone to have posted the list of compatible drives in the first place if you can only use the same model as the one currently installed. Unless something changed with newer firmwares, but then you don't remember where you heard the claim anyway. Hopefully someone who has replaced a drive can chime in.
The receivers that can't be activated seem sketchy to me since you can't know that there aren't other problems with them.
Look for the Canadian ebayer selling new 500gb drives with 100% feedback. I know for a fact his work in the 9241. They also come with full warranty.
9241 hard drive
Well i replaced my internal CinemaStar HD with a Seagate - more or less the same #'s etc .... bottom line still no PVR functions. Is there a reboot required to initiate the new drive? Did i screw up by not replaceing with the exact same HD?
I took this HD PVR off my subscription for now , but it still downloaded updates ....
More or less the same numbers doesn't work. There is a list of drives that will work. You must match the model number to one on the list exactly.
The list can be found in post #3 of this thread.
What is the latest list for drive replacement?
Solved - bell 9241 hard drive replacment
SEP 26. 2013
Hello, I was looking all over for help on a hard drive replacement. I got three new 9241 boxes from bell and they all stutter and skip during HD recordings. The worst was when trying to play a hockey game 1 hour after it started, and then speeding through the commercials and intermissions until I caught up in real time. That's when the skipping got bad.
I pulled the box apart and found a crappy Seagate hard drive. Years ago they were the best, since 2008 they are the worst. So I wanted to put in a new drive.
I tried some very fast solid state drives, and some of the best quality Western Digital drives, none worked.
It seemed that the firmware only accepts certain drives and not others, and this sucks.
The original drive was a Seagate pipeline 320GB, 8MB cache, 3GB/SATA. Apparently Seagate and Western Digital have a AV drive series that are good for security cameras. They have a long life and don't power down. Most speeds of the drives are 5900RPM.
So I bought a new 1TB Seagate pipeline drive. It has 64MB cache, 6GB/SATA. There are other tech specs that make the drive faster, but all I want is the skipping to stop, and these PVR boxes are just plain old computer mother boards, with a CPU, and a hard drive, and a BIOS - OR - FIRMWARE that decodes the bell signal and has the menu driven system in order to do its job.
So the weakest link in this system was the poor hard drive. If anyone knows what model of solid state hard drive can go in then there is no problem. I put them in server computers and they have been running 24/7 for over 5 years, no problems. The best ones to get are Intel 520 series and the Kingston Hyper X series, all others may not be of quality. This is how all future PVR system will come, I just wish I could put one in my system.
If I do not add to this post then you will know my problem is solved
There is a list somewhere on the forums with all of the model numbers that will work, but I doubt you'll find a "firmware-approved" SSD for it.
Keep us posted if the TB drive works. As for your remark about SSD'd being in PVR units. that wont be for a long time. not when they cost is so high for anything above 120gb. Especially any drives that are decent quality. mechanical drives will always be cheaper per GB and Bell only cares about their bottom line. it shows with the cheap drives they put in the PVR units. I wouldn't touch Hitachi with a 1000' pole. yet they are still used widely because they are dirt cheap.
showex, there is no SSD drive that will work.
You need to look back to the old days where 320gb drives were the latest and greatest. And then you need to figure out which one will work. (lists are here on DHC...... hint... try looking at post #3).
The 9241 will not even give more recording space when a firmware recognized 500gb drive is installed. It still only gives 320gb recording time.
Summary.......the 9241 is the worst and least capable dual tuner HD receiver Bell has ever supplied.
Sadly showex never came back. Id be interested to see if it takes the full TB, maybe the 9241 has the ability since the 9241+ has hit and the firmware is probably the same.
|All times are GMT -4. The time now is 08:53 AM.|
Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.