|Topic Review (Newest First)|
|2009-10-26 02:23 PM|
Originally Posted by cjob68 View Post
|2009-10-19 03:38 PM|
Originally Posted by Macman View Post
Either way, I'm happy over all with the picture quality of MTS HD. Coming from Star Choice HD, I still think it was a little better, but unless I had both services side-by-side I don't think I could say that for sure. MTS definitely has a big leg up with the pvr rental options.
|2009-10-19 12:25 PM|
Not my building
So I just called, they said that HD is not available to my building. Might be because it is running off a different pole than the other two. She said to check back in the new year.
I find it funny that one building out of the three is connected differently, but I wasn't involved in wiring the complex so whatever.
Good luck to everyone else wanting it.
|2009-10-19 09:02 AM|
|Mozza||Agreed - best to call in and verify.|
|2009-10-19 03:45 AM|
|Macman||I'd say it's probably just a glitch, and that all 3 are probably fed off the same telephone line coming from the pole.|
|2009-10-18 11:53 PM|
Available in my area, but not??
So I live in an apartment with three buildings. Each building has its own postal code. According to MTS' web site the two buildings which I do not live in have the HD TV available, whereas my building does not.
Has anyone else had this happen to them? I plan on calling them tomorrow but curious what other people's experiences are like this.
|2009-10-18 05:43 PM|
The system works like this: The main receiver (Motorola VIP 1216, the one with the hard drive in it) is fed with Cat 5 from the 2WIRE hub. All the other tv's in the home are fed with coax off the 2WIRE hub, using a technology called HPNA. This is the way all homes are supposed to be wired up, to meet MTS's standards. The main reason being that there are only 4 ethernet ports on the 2WIRE hub, but a home can have up to 6 set top boxes (including the main PVR, the VIP 1216). So TV's 2 through 6 are run off coax since a splitter can be used, thus keeping 3 ethernet ports on the 2WIRE open for internet.
I'm guessing the main TV could run off coax, but there wouldn't be any difference in picture etc as those wires are just carrying digital data, not analog pictures.
IMO, just leave it as is.
|2009-10-18 05:13 PM|
|cjob68||No I didn't call MTS about this.|
|2009-10-18 02:31 PM|
Hey guys, just a random question about cables, which I know absolutely nothing about. Just moved to a new house and MTS hooked me up with HD again. The installer ran an ethernet cable from the main hub receiver to our main 52" TV and a coax cable to my little 27" tv in the bedroom. (There's only one coax spot out on this main receiver.) My husband seems to think that coax would have been better for the main TV. Yes/no? What do you guys think? Would it make any noticeable difference going with coax for the main TV? (Just trying to make him feel better about it.)
** Oh btw, for those going through old posts here, the problem I was having with audio drop outs completely went away one day! I'm thinking it was after firmware update. (I noticed a change in the grouping of my recorded shows at the same time the audio was fixed for me.) So that's great news. It's SUCH A RELIEF not having the sound cut out every 30 seconds!!! Almost had to go back to Star Choice.
|2009-10-09 12:25 AM|
GREAT TO HEAR. Hopefully others having the same problem happen across this.
Did you call MTS and let them know?
|2009-10-08 11:49 PM|
|cjob68||I found a fix. I turned off digital noise reduction on my tv and the remotes now work perfectly.|
|2009-10-08 12:46 PM|
|cjob68||The MTS box is on a shelf below the tv and I have tried moving it forward but it didn't seem to do anything. I can't move it to the side because there are other components in the tv stand. After doing some reading online there seems to be an issue with the Motorola box and LCD and Plasma tvs where the tv's IR interferes with the Motorola box getting the signal. I have a large LCD tv so this may be the issue.|
|2009-10-08 12:16 PM|
The Harmony remote 100% helped me, so I'm not sure what to tell you.
|2009-10-08 11:40 AM|
Clipse, the new channels won't be added until Oct. 26. However according to this post you will NOT be required to get the SD timeshift to order the HD timeshift.
|2009-10-08 10:49 AM|
In order to get the HD feeds of the major networks are you required to take Time Shift East/West since those are the cities feeds in HD? Or due to having the network in Basic does that count?
Can anyone with the service let us know...
|This thread has more than 15 replies. Click here to review the whole thread.|