|Topic Review (Newest First)|
|2008-06-05 11:32 PM|
|2008-06-05 02:27 PM|
I want my HDTV he already has the components for the machine and has questions reguarding a MCE remote, etc.
Yes to control all of the functions in VMC you need a MCE remote. I just picked up the HVR-1800 and it came with a remote but also I had bought an MCE remote from NCIX for 30$ but in the end it would not control my Moto DCT-6200 HD receiver so i grabbed the IR lead from the Hauppauge controler and it is flawless now.
The other alternative is just getting an IR blaster (USB) or the Hauppauge one that will plug in to the tunder and then using a Logitech Harmony remote (this is basically what I am doing).
I have not tried the Hauppauge software so I am unable to say how it is, but from general speak on the net it is not the greatest. Also for my area VMC has a pretty good guide.
|2008-06-05 01:33 PM|
Seems a bit over the top in some respects...
1. Nice case... Sometimes smaller is better. Check out the Lian Li PC-36
2. Good motherboard, have it in my workstation. A good M-ATX multimedia board should be enough.
3. CPU overkill... C2D is plenty. One of the new low power C2Ds or a 45w AMD CPU would be good.
4. Smaller PS would be Ok. High efficiency is good. Efficiency varies with load so "right sizing" is important.
5. I would get a Hitachi Deskstar P7K500. It uses half as much power.
6. Video card looks Ok for video but seems out of line with other components. The GeForce 8500 will not do things like games well (if that is your plan.) I would go with an 8600GT or 9600GT or just use on-board video.
6. On board HD audio should be fine.
7. Omit speakers and connect it to an Home Theater. That is, unless your plan is to use a 24"+ wide screen monitor to watch video...
Please review this thread.
|2008-06-05 01:47 AM|
My New HTPC Build
First off, I want to start by saying I have been reading this forum for a while now and find the people on here extremely knowledgeable. It seems to be one of the better forums going right now! I decided to jion up and start posting!
I recently undertook my first HTPC build (only my second PC build ever..) and here is a quick list of components I went with:
Thermaltake DH101 case
Asus P5K-E/WIFI-AP mobo
Intel Core 2 Quad Q6600 2.40GHZ
Antec Neo HE550 HE 550W PS
Corsair XMS2 2X1GB 6400C4 Memory
Seagate Barracuda 7200.11 500G SATA2 HD
Asus GeForce 8500T 512MB Silent Passive Video Card
LG GGC-H20L BRD/HDDVD SATA2 combo drive
HT Omega Striker 7.1 Sound Card
Thermaltake Blue Orb II CPU cooler
Vista Home Premium 32bit OS
Logitech Z-5500 speakers
It took me a while to figure out what was the best combo for what I wanted to do and this seemed like a good fit. My goal was to put something together that would work with the latest technology and replace all of my current HT components PLUS add Blu-Ray capability. Any comments on the above would be appreciated!
I am planning to pair this unit up with a SC HD505 receiver for PVR recording only. I am not too concerned with running the HD505 signal through the HTPC for regular TV viewing as I will connect the HD505 directly to one of the the LCD HDMI ports and run the S/PDIF or D/Coax signal from the box directly to Logitech Z-5500 control head. For recording purposes I will run S-video from the HD505 to the tuner card. I havn't decided on audo input yet as I have S/PDIF input capability on the Omega Striker or RCA input on the 1600.
Now that I have it up and running I have a few questions that hopefully some of you can answer.
1. The Thermaltake case came with it's own Media Lab system to run the VFD and supplied remote. This works off the iMon utility. It also came with iMedian software. Does anyone have any experiece with this setup for recording TV?
2. I have been playing with MCE but find the Thermatake remote does not control all the functions in MCE, I assume I would have to purchase a MCE remote & IR receiver for best MCE control? How about recording in MCE? How about VFD display control while using MCE?
3. The software that came with the WinTV tuner card also has capability to record TV programs, how does it rate?
4. I assume I will need some type of IR blaster setup to control the HD505 for recording purposes. I see the 1600 has a port on it for an IR receiver/blaster. Will the type of blaster I need be defined by what software I use for recording? Any suggestions on a good IR blaster to work with the HD505?
Thanks for any and all input!