|Topic Review (Newest First)|
|2008-04-26 11:28 AM|
I have the Hauppauge HVR1600, which came with its own remote and IR receiver/blaster. It is a combined cable that plugs into the back of the 1600/
If I want to use MCE, from what I can gather, I cannot use the receiver to control MCE.
1 - If I buy a 3rd party USB IR receiver, can I use my Hauppauge remote, and
2 - will the Hauppage blaster still work.
If yes, can someone point me in the right direction.
|2008-04-21 05:20 AM|
|I_Want_My_HDTV||All you really need is an IR receiver and a driver. Some HTPC cases provide this or they can be purchased separately. An IR receiver/transmitter provides the ability to control other devices directly from the PC (such as cable/satellite receivers) and is an advantage when recording TV. Girder provides more flexibility but is expensive and not necessary much of the time. Popular receiver/transmitter/remote devices have wide support in application software. If you know what software you will be using, choose something that is supported by the software. The MS Media Center remote and receiver is an obvious choice if you are using Windows MCE exclusively. The Harmony 880 should have codes available for any popular IR remote. It can also learn new codes. (I've had issues with the SoundGraph iMon so it is best avoided.)|
|2008-04-14 06:00 PM|
The MCE remote is often a good buy as Girder costs $50 as do most IR receivers/transmitters such as the USB-UIRT. You can buy the MCE remote plus receiver/blaster for around $30.
But I don't know that you can always use the MCE remote with software other than MCE.
|2008-04-11 10:19 AM|
Actually for a 880 if you select Computer -> MEDIA CENTER PC the preset commands are fairly good if you are using basic mce. very easy setup
if you want to control you mouse etcetc and do other pc fuinctions then the girder way is good but can be fairly time consuming to setup
|2008-04-09 06:46 PM|
You will need some kind of IR receiver in the PC and a program such as Girder or Eventghost running on the PC.
Then you select a dummy device on the harmony, basically a component you don't have, and configure the S/W to interpret the IR commands and pass them to the PC.
MCE also has built in remote support, but I have not used that.
|2008-04-09 06:39 PM|
Remote for HTPC
I have a Harmony 880 remote, what else i need to controle my PC Htpc from it?
THX in advance