|Topic Review (Newest First)|
|2018-11-03 05:50 PM|
ONE-TO-MANY type CAT-5/6 HDMI Extenders using a Router/Switch as central Hub [so no need for HDMI Splitter as mentioned above]....plus additional Wireless HDMI Alternatives:
|2018-11-03 05:08 PM|
So, I ordered a 1x4 splitter from Amazon and a 75' redmere hdmi cable. Had things hooked up for a day or so to test before permanently installing. All is working good. I think I will order another cable and hook up the bar TV too.
Thanks for all the suggestions guys. In the end I wound up with a pretty easy and cheap solution.
fyi, so glad I installed cable pulls when we remodelled. Made running cables pretty easy.
|2018-10-23 12:34 PM|
|ExDilbert||It is possible with other providers but a little more involved. HDMI to composite modulated RF converters are available. (A HDMI to composite adapter plus an RF modulator would also work.) IR remote repeaters and universal RF remotes with slave IR emitters are available. Dish/Bell made it easy with their 9200 PVRs but it's not impossible with today's equipment.|
|2018-10-23 11:18 AM|
Originally Posted by Paolo View Post
i could see the same channel on up to 3 tvs but since it had 2 tuners i usually had a seperate tuner on my bedroom tv. but the pvr was shared and could watch my recordings anywhere it was kick ass. i loved this setup, everyone who came to my house was jealous of it too, they always asked why there is no satellite box in my kitchen. i told them its in the basement. they asked how they can do that with their rogers and I told them it was very difficult to do with rogers and they were so upset.
|2018-10-22 04:49 PM|
|Jorgek||What about OTA to some of the other TV sets? Do all sets have to have a full compliment all TV channels?|
|2018-10-22 03:17 PM|
Another answer to the op's question, not sure why I did not answer it earlier. Some TV providers have this limitation which makes it very difficult to do, while other TV providers equipment makes it a lot easier. I forgot to mention I am currently doing one STB to multiple TV's with my Bell TV Setup, tho I have recently cancelled it. Not sure how you feel about changing providers but sometimes there are other providers that serve your area and you do not think wait a sec what if these providers have better technology?
My bell setup included an RF coax out which backfeed into my coax wall plug and was re-distributed to 2 other rooms in my house, plus my remote is RF so it worked between different rooms and walls and such, and to make matters better, it was widescreen 480i SD, and looked great on my other 2 tvs.
|2018-10-21 12:30 AM|
Originally Posted by Jorgek View Post
If you have something in the wall that's incompatible with the equipment of the time you will be forced into change whether you want it or not. A bunch of cables in the wall are no use if all of tomorrow's equipment is wireless for example or requires different cabling.
The era of TVs (and other equipment/hardware) that lasted for 20 years with very little change in technology is long gone. Even seniors who don't want any change are being forced to change if they wish to watch TV, in whatever manner...
|2018-10-20 08:10 PM|
|ExDilbert||The cost of renting vs buying depends on a number of factors. The first is rental cost. Some BDUs charge way too much for rentals and have no option to buy. $5/mo for a cheap IPTV box is about right. Any higher and it becomes gouging. Another is projected lifetime of the BDU hardware, including failure and obsolescence. That's typically a maximum of about 5 years these days and is more likely about 3-4 years on average. It's quite probable that devices will work longer but they will be made obsolete by technology upgrades or lack of support. That includes things like cables. HDMI is an evolving standard with no sign that updates will stop anytime soon.|
|2018-10-20 07:46 PM|
Originally Posted by BJ James View Post
An alternative is to buy an IR emitter that you tape over the IR sensor on the STB. These can be less reliable because they rely on being able to accurately line everything up so the flashes are detected correctly. You will have to check the specs from the IR emitter manufacturer to see if they will allow you to use the downstairs remote directly with the STB. They might call this pass-through.
|2018-10-20 06:56 PM|
Who says you have to keep upgrading. I'm quite happy with 1080p and have no desire for 4K.
You are assuming that everyone is jumping on the band wagon to be up with the latest technology that is constantly being crammed down our throats.
|2018-10-20 06:01 PM|
Youíre right. Once I started thinking more about this, I realize the having even a second stb will make things easier.
So, letís say I get Hay back in to install the second stb near the cluster of 3 tvís. One tv is on the main floor in the kitchen, the other 2 or almost directly beneath in the basement rec room and bar area. If I run these off an hdmi splitter and i run a remote extender for the kitchen tv, can I still use a remote to control the stb downstairs? The stb would 100% have to live downstairs as there is no good place in the kitchen to put it.
Being a cheap bastard is in my genes.
|2018-10-20 05:39 PM|
Originally Posted by Jorgek View Post
Something else will come along and make the "one time capital investment" you mention obsolete. Just ask all the people who installed in-wall composite video, or component video/analogue audio, etc. Even expensive wireless options will become obsolete as the technology changes.
I know this because I've got a 25' run between my audio video equipment and my TV which acts as a monitor, see my HT link in my sig. I've had composite video, better composite video, component video, HDMI and if I wanted 4K signals to my 4K TV, I'd have to change out my HDMI. Luckily for me, my run is (relatively) short and is easy to change, since it runs behind a baseboard and the costs have been minor during each cable change. I can barely imagine the costs involved when multiplying this by four, over long distances, making the installation and equipment/cable costs exponentially larger.
To top it off, all four locations have to watch the same programme! That's just silly.
|2018-10-20 05:04 PM|
The problem is that renting equipment is a never ending cost. Over a number of years it could be a significant amount.
Whereas a one time capital investment is final.
I believe the issue was for a cost effective solution.
|2018-10-20 04:25 PM|
This discussion, although interesting from a technical standpoint, seems very silly to me. Anyone with 4 TVs and a large home with huge distances between TVs shouldn't even be considering this option. That person should rent/purchase a STB for each TV and watch whatever they want easily and without issue. The operability would be far superior and the cost is probably not any more than a bunch of HDMI switches/splitters, adaptors, cables, amps, RF remotes, etc.
(I could perhaps understand it if there were a nearby, seldom used TV...)
|2018-10-20 02:49 PM|
|ExDilbert||That can be handled with RF remotes or RF remote extenders. Range may be an issue at 40'-50'.|
|This thread has more than 15 replies. Click here to review the whole thread.|