|Topic Review (Newest First)|
|Yesterday 05:43 PM|
I used a Harmony 650, so I didn't have those issues with the hub. After I thought about it, I think I used the model from the physical label on the PVR - I think it might have been Shaw AX014AN, The model number on the STBs wasn't in the Harmony database, but the PVR code worked for those as well.
The Shaw voice remotes work on RF, but the Shaw boxes supposedly have IR enabled by default as well. The place I set up use whichever remote is handy. They like the Harmony because they have a lot of other devices and they keep both remotes handy.
If the Shaw box doesn't respond to the Harmony, try this thread:
|Yesterday 05:27 PM|
What was it about the Bluecurve that made you feel it was an 'upgrade'?
|Yesterday 03:31 PM|
|57||I believe it can be RF from the (Rogers) remote since the box can be hidden away. However, it also receives IR since that's what most of the Harmony remotes send. Many people find the (Rogers) remote useful due to the voice commands for searches, or skipping 3 minutes, etc., so the number of people using Harmony is not that high.|
|Yesterday 03:28 PM|
|spitoon||I could probably look this up, but do you happen to know how the Xi6 box receives its signals? WiFi? RF? IR?|
|Yesterday 03:20 PM|
|Yesterday 03:17 PM|
Originally Posted by Dr.Dave View Post
Thanks for the input.
|Yesterday 03:14 PM|
Originally Posted by Nanuuk View Post
|Yesterday 02:59 PM|
I set up a Harmony remote for someone else a couple of years ago using the BlueCurve wired STBs. I'm pretty sure the codes are the same for the wireless boxes, but I can't remember what I used. They use the Shaw remote and Harmony interchangeably.
Keep in mind that the content owner sets the length of time that On Demand is available. Some programs are only available for a few weeks and others may not be available on demand at all. You should also be aware that Cloud recordings automatically expire after 1 year.
|Yesterday 01:27 PM|
|Nanuuk||Thanks for the post. I assume you lost all of your Gateway recordings. Did you subscribe to a new BlueCurve TV package? I had posted on the Shaw Support site on the question of whether you could retain your existing package (in my case a grandfathered Popular Tv plan) and the answer was yes. So I'm curious as to what route you took. Thanks in advance.|
|Yesterday 01:06 PM|
Hi All, I used to roam these forums back in the day when I had a DCT6412. Moved on to a 3400 and eventually a Gateway system.
Last week I upgraded to the Bluecurve system with the wireless portals.
Not sure if this is the correct forum, but I have three initial questions for anyone that has experience with this system.
First, I can't find any info on the capacity of the cloud based pvr. I think it's 500GB (and not expandable at this time), but it doesn't seem to be posted anywhere on Shaw's website. Coming from my expanded Gateway, I initially thought this might prove to be a challenge, but with all the "On Demand" options it's probably okay. You don't need to record as much, at least as far as most regular network stuff.
This leads to my second question relating to the On Demand offerings. Does anyone know how reliable they are? For example, we've been watching a show on History called Kings of Pain. On Demand has episodes 1, 2, 3, and 5. Why not 4? If the On Demand system is going to be unreliable then we will have to record everything and the PVR limit will become an issue.
Lastly, I've been unable to get my Harmony Hub to connect to the Xi6-A box. Harmony doesn't have them in the catalog of devices at all, but I was able to find two options, one is Roger's Ignite and the other is Comcast. I tried those and neither work. The next step would be to make the Harmony learn all the signals, but that seems like a great deal of work, and I'm not even sure the Xi6-A responds to IR signals? Its only been a couple days and we will probably keep using the Shaw remote anyways because of the voice activated system, but I must tinker.
|2019-08-24 02:30 AM|
Thanks for the reply. I found the diagnostics setting and as you said it doesn’t let you adjust anything just shows information. As for #2, I couldn’t find any audio compression settings like some of the past Shaw Motorola boxes had. I can adjust this on my receiver but found it made no noticeable difference.
As for #3 I know how to increase the audio input volume (my Pioneer receiver lets me adjust it +/- 12 dB). The problem is that the Netflix and YouTube apps (run through the Arris Xi6 box) are already much louder than the tv channel volume. So adding volume to the input just makes Netflix/YouTube run even louder.
I guess I’ll just live with it as is and crank it up as needed when watching cable.
|2019-08-23 05:06 PM|
Originally Posted by mi6_ View Post
2. Some boxes have audio settings for Narrow, Normal, Wide. The Narrow setting is usually a bit louder but also decreases the dynamic range.
3. Most AVRs can be balanced for volume via the input on the AVR. If you have a half decent AVR it should be possible to adjust (increase) the volume for the particular problem input. Check the operating manual for your AVR.
|2019-08-23 03:17 PM|
Hello I’m hoping one of you can help me. I just got Shaw BlueSky TV with one of the new 4K wireless boxes (see the link below for model info). The make/model is an Arris Xi6.
Unfortunately the audio output level via HDMI to my receiver is too low for my liking (about 6-10 DB lower than my other inputs: Xbox One, Sony Blu Ray player etc.). When you use Netflix or YouTube apps on the cable box the volume output is consistent with those services on Xbox or my Sony BluRay player for example. There is no setting that allows me to increase the TV audio volume (only options are 2.0 PCM, Auto DD+ or Expert which just outputs DD+). I contacted Shaw who said there was no volume adjustment on these new 4K wireless boxes.
I know from watching the installer that there is a secret setup menu (for example on my old Motorola 3400 I believe you powered it off and hit menu to bring up this secret settings menu). Does anyone know how to access this installers menu on this new box? I’m hoping there is a hidden volume setting in there.
Or have any idea how to increase the volume output of the 4K Wireless Blue Sky box? I know I can artificially do this via my receiver, but then the YouTube and Netflix volumes is way too loud when watching through the apps on this new BlueSky box.
|2018-09-29 04:42 PM|
I don't think you will see remote scheduling on BlueSky anytime soon. Shaw is totally dependant on Comcast for BlueSky technology and Comcast lost a patent lawsuit with TiVo regarding remote scheduling. Comcast appealed the U.S. ITC decision in federal appeals court in January, but no court date has been set.
Comcast has won some other patent lawsuits against TiVo, so it's possible that once the remainder of the 45 disputed patents are decided, Comcast may choose to license the valid patents.
|2018-09-28 10:58 PM|
Sadly no. I don't get why they've gone backwards on this one
Sent from my SM-G965W using Tapatalk
|This thread has more than 15 replies. Click here to review the whole thread.|