|Topic Review (Newest First)|
|2019-09-03 02:53 PM|
Got it folks! thank you for clarifying this for the US receivers.
And what about Ontario vs Quebec? I mean... I live in Quebec where I don't find a single VIP2502 in the classifieds, but if I extend my search to Ontario, there's PLENTY of VIP2502 in the classifieds... is there something different between Bell's terms of services in Ontario and Quebec? Am I missing something here?
|2019-08-31 03:23 PM|
|2019-08-31 01:02 PM|
I moved your post to this thread since there was a good discussion of buying used equipment starting here:
The reason you see used receivers so cheap in the U.S. is because they are likely rental units that people don't own, since AT&T only rents those receivers. Bell can only activate receivers that are in their database of serial numbers.
|2019-08-31 11:46 AM|
Did USA ARRIS VIP2502 receivers can be activated on Bell Fibe?
I am just wondering if any ARRIS VIP2502 receivers coming from USA providers may be activated on BELL FIBE? They are easier to find used in USA and extremely cheap... compared to classified in Canada...
|2019-07-20 06:53 PM|
|57||Sorry, but the Fibe system "authenticates" the recordings each time you try to play and if you're not connected to Fibe, it won't play.|
|2019-07-20 03:18 PM|
I decided to quit Bell for a better and less expensive offer from another provider. I canceled my Fibe TV subscription, but my VIP2262 VPR box is mine (purchased from Bell) and I still have a few recordings on it which I'd like to watch.
I connected (HDMI) the PVR to the TV, and I see "Bell Fibe" on the screen. But I cannot get to "Menu", neither from my remote, nor from the "Menu" button on the box.
Can somebody please help? And sorry if I'm posting on the wrong site. It's the first time I'm posting and didn't know better.
|2019-07-04 04:21 PM|
|giovanni||Yes, you are correct. I would like to have a hard connection to an android box where my tv is right now. So just trying to see what I can do if I choose to go with Fibe when available.|
|2019-07-04 02:46 PM|
|ExDilbert||The issue is that some people like some devices wired. A file server or workstation might need full 1Gb speed to operate efficiently, especially with 1Gb internet. Wifi, especially the way most ISPs install it, may deliver insufficient speeds to perform large backups or for working from home. Most mesh hubs, as supplied by Bell, are designed to provide maximum coverage, not maximum speed. While they are usually adequate for portable devices and video they may be too slow or cause unacceptable wifi network congestion for other uses.|
|2019-07-04 01:20 PM|
Yeah, it's all wireless, no need to use coax or anything really.
My son just had FIBE FTTN installed (even though they have just finished the FTTP in the neighborhood, Bell wasn't quite ready to connect to the houses yet). But matters not, wether it's FTTN or FTTP, it's all wireless.
In my son's house they just plugged the 3000 modem into a phone line at the demarcation point and then the PVR is wireless and the other receivers are wireless. They also plugged in a bunch of those repeaters into the wall on each floor to ensure wi-fi coverage.
|2019-07-04 12:37 PM|
|Dr.Dave||@giovanni Bell uses wireless TV boxes for new installations. The Home Hub 3000 router uses a separate Wi-Fi radio to communicate with the TV boxes so it doesn't interfere with you internet Wi-Fi traffic.|
|2019-07-04 12:34 PM|
If the distance is not too great, a couple of good AC routers that support mesh would be more versatile and will provide decent speeds. A second AC router configured in bridge or repeater mode may also be adequate. In bridge mode, the PC would be plugged into the router's LAN port and get the full available speed of the router. The router would also act as a wifi extender.
|2019-07-04 12:17 PM|
|17671||what would the rg6 coax be used for? for running an internet line from your modem to a pc? if so, with all the costs of media converters its probably a better idea and makes more financial sense to run a new ethernet wire instead. ethernet is really only used for connecting hardwired computer devices, if you happen to have Bell Fibe "TV" then the receivers are wireless or the tech may run their own ethernet wire because re-using an existing wire may add problems down the road especially when ethernet to coax converters or power line ethernet devices are used they can fail and cause problems which can complicate the troubleshooting, so its advised to just run new ethernet wires or use the wireless tv boxes or if u can run wireless to your laptops and stuff go for it|
|2019-07-04 12:17 PM|
|2019-07-04 11:59 AM|
|giovanni||Interesting....What would be required to use the existing RG6 cable? I assume these adapters would be required on both ends of the RG6 cabling?|
|2019-07-04 11:13 AM|
If cabling is used, it will be ethernet CAT5/6. Existing telephone wiring can be used for telephone. Any existing ethernet cabling can be reused. Wifi can be used where it's not easy to run ethernet cable. If there are any dead wifi zones, Bell can supply mesh nodes to extend the network. It's possible to use existing RG6 coax for ethernet but the adapters are fairly expensive.
Bell typically buries cabling about 6" outside to the home so no extensive excavation is required. Getting the cable into the house is no different than coax cable or a phone line. They may the existing holes. Don't let them remove the cable company's coax entering the house.
|This thread has more than 15 replies. Click here to review the whole thread.|