Firmware Version 09.15 - Page 7 - Canadian TV, Computing and Home Theatre Forums
Closed Thread
 
LinkBack Thread Tools Search this Thread Display Modes

post #91 of 104 (permalink) Old 2013-04-28, 10:23 PM
Veteran
 
Join Date: Mar 2010
Location: Interior
Posts: 1,774
I think the high numbers are just that, anew scale but the same signal quality. I don't use the sat much but when I did the xku lnb did nothing for our pixellation/glitching.
gzink is offline  
Sponsored Links
Advertisement
 
post #92 of 104 (permalink) Old 2013-04-29, 05:38 PM
 
Join Date: Dec 2010
Posts: 61
I still have problems

1) SPONTANEOUS REBOOTS- sometimes several in 1 hour. 2)VERY SLOW TO RESPOND TO COMMANDS-sometimes 20 to 30 or more seconds to respond. 3)PIXELATING- usually happens when recording something. 4) LOOSE VIDEO AND AUDIO- does not happen very often, but when it does I can get it back by changing off the channel and the back on. 5)SOMETIMES CAN NOT STOP RECORDING-sometimes it will stop at the end of the recording, sometimes not. Have to do FP reboot to fix. 6) SOMETIMES RECORD LIGHT ON BUT NOTHING BEING SHOWN AS BEING RECORDED ON LIST. Light stays on forever until I do a FP reboot. 7)SOMETIMES SAYS MANUAL RECORDING INSTEAD OF THE PROGRAM NAME FOR RECORDED PROGRAMS- FP reboot usually fixes it. 8) SOMETIMES GUIDE SHOWS NO DATA FOR ALL CHANNELS- FP reboot usually fixes it. 9)SOMETIMES CAN NOT PAUSE, BACKUP, FF, ON LIVE AND RECORDED PROGRAMS- FP reboot usually fixes it. 2 and a half years and still these 630s not right. Spending over $130 a month now on programming. Maybe it is time to call telus.
ralphf is offline  
post #93 of 104 (permalink) Old 2013-04-29, 05:50 PM
 
Join Date: Mar 2006
Location: Calgary - Shaw phone/internet, OTA attic / Pigeon Lake - CCI Wireless, VoIP.ms, OTA, FTA, LTSS
Posts: 810
All the signs of the 630 death spiral, call to get the box replaced.

Even if you cancel and go to Telus, you'll want a working box so you can sell it.
envirogeek is offline  
 
post #94 of 104 (permalink) Old 2013-05-17, 08:10 AM
 
Join Date: Nov 2012
Posts: 194
09.22 was downloaded onto one of my 600's last night (took over 35 minutes). I've not checked the other 600, but the 630 has not yet been downloaded or targeted. Anyone know what this version is supposed to fix? It can't be much as it's only a point release. I checked the guide and menu options and the only new items were the move notices for the audio / radio channels. Everything else is the same.
CrispyPotato is offline  
post #95 of 104 (permalink) Old 2013-05-17, 08:29 AM
 
Join Date: Dec 2004
Location: Muskoka, Ontario
Posts: 844
I was told last week or so that staff were testing the new HD guide, but that seems not to be part of this.
smp01 is offline  
post #96 of 104 (permalink) Old 2013-05-19, 07:54 AM
 
Join Date: May 2011
Location: Mississauga
Posts: 32
Found this information on another site:

Starting on May 16th (for HDPVR 630 units) and May 18 (for HDDSR 600/605 units), Shaw Direct will be deploying software version 09.22. Once targeted (as seen on line I in OPTIONS 4-7), your receiver will automatically update at around 2:10AM local time. It is not possible to force the update if you have not been targeted.

The overall look and feel is unchanged with this download.

This release provides increased VOD speeds, significant PPV enhancements, and improved stability. Prior to 09.22, the last software download was 9.1512.
paddy209 is offline  
post #97 of 104 (permalink) Old 2013-05-21, 06:56 PM
 
Join Date: Nov 2006
Posts: 82
Sometime yesterday something happened and my 630 lost all timers.
I dont know what happened but they were wiped.
Granted I probably had too many (over 100) and needed a cleanup but this is very inconvenient.
Ochato is offline  
post #98 of 104 (permalink) Old 2013-05-21, 08:17 PM
Premium Supporter
 
Join Date: Jun 2004
Location: Saskatchewan
Posts: 696
Haven't got my update yet on 630
noah12 is offline  
post #99 of 104 (permalink) Old 2013-05-22, 03:06 AM
 
Join Date: Oct 2008
Location: tarana
Posts: 1,078
9.22 arrived at 2:10am....lasted nearly 45 minutes!
tvmaster is online now  
post #100 of 104 (permalink) Old 2013-05-22, 10:43 AM
 
Join Date: Nov 2012
Posts: 194
My other 600 was targeted for Tuesday night but I did a manual download on Monday evening (not sure of the length of it as I was doing other things and didn't pay attention). My 630 hasn't been targeted as of this morning. I do hope the HD guide arrives sooner rather than later though!
CrispyPotato is offline  
post #101 of 104 (permalink) Old 2013-05-22, 07:27 PM
 
Join Date: Feb 2011
Posts: 6
Me to took over hr and dont notce much of a diff.
soltech is offline  
post #102 of 104 (permalink) Old 2013-10-31, 10:44 AM
 
Join Date: Feb 2010
Location: Sault Ste Marie
Posts: 86
One thing I have noticed is that since the download I am getting re-boots constantly! Had the tech out and the signal is great. He indicated that I should call for a new receiver again!
Reading this thread tells me that it is not the receiver as many are having this re-boot problem. I am on my last leg with SD and will soon be pulling the plug and going back to BEV. They are offering me a free HD PVR as well as a second HD receiver that I can make a PVR by adding an external HD. Also free installation and they have more HD channels than SD by far. Also programming is cheaper for what I am currently getting.

One more month will tell the tale.
thundercraft is offline  
post #103 of 104 (permalink) Old 2015-03-16, 05:34 AM
 
Join Date: Sep 2009
Location: Marystown, NL
Posts: 580
The PVR got the download last week the regular box 600 I think it is updated this morning neither has rebooted.
Doppelganger399 is offline  
post #104 of 104 (permalink) Old 2015-03-16, 08:02 AM
Veteran
 
Join Date: Nov 2003
Location: OTTAWA
Posts: 1,818
Mods... its time to lock this thread. Very old.

~Gary
Shaw Direct DSR 630 HDPVR w/Ontario Life | Aquos 46" 120Hz LCD TV | Watch Me!
GaryE is offline  
Closed Thread

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Canadian TV, Computing and Home Theatre Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools Search this Thread
Show Printable Version Show Printable Version
Email this Page Email this Page
Search this Thread:

Advanced Search
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome