Canadian TV, Computing and Home Theatre Forums banner

Discussions Showcase Albums Media Media Comments Tags

1-7 of 7 Results
  1. New Member Introductions
    I have only 2 outputs from my lnb working...a single and a dual tuner receiver hooked up working fine but cannot hook up 3rd receiver as no signal on other outputs....do they have to be hooked up in a particular order? as I just hooked up the 4 cables on lnb (roof) and unsure which cable is...
  2. Bell Satellite TV Hardware Installation Forum
    Edit by 57 - here's a link for the various LNBFs: http://www.digitalhome.ca/forum/2346993-post1783.html 92XX series installation: 92XX/94XX Installation 101 - Canadian TV, Computing and Home Theatre Forums Having read the topics of attaining satellite 82 after receiving satellite 91 the...
  3. Bell Satellite TV Hardware Installation Forum
    This switch has become a little more available recently so I thought I would include it in the Installation forums for anyone interested. It is similar to the DPP44 switch but has 3 inputs and outputs instead of the 4 the DPP44 has. It is about half the price of a DPP44 switch so if you only...
  4. Bell Satellite TV Hardware Installation Forum
    Hello, I have a DPP setup with 2 coax cables entering the house from the dish. On one cable I have a 3100 receiver connected, on the other I use the DPP splitter to split the single coax into two coaxes that connect to my 9200 HD PVR (dual tuner). This setup has been working perfectly for about...
  5. Bell Satellite TV Hardware Installation Forum
    This post is just an index or summary of links for your specific installation needs. If you want to learn about the different parts of a dish look here. For most common Bell installations and Bell approved equipment look here for SW21 and here for SW44. For lnb's with built in switching...
  6. Bell Satellite TV Hardware Installation Forum
    A DPP44 switch will also give you four outputs however requires the lnb(s) to be DPP twin, DP singles, DP duals, DP twin or a DP quad. Just like the DP34 it only requires two lines into the switch to get 82 and 91. This switch just like the DPP twin allows you to use a DPP separator(s) for...
  7. Bell Satellite TV Hardware Installation Forum
    Another lnb is the DishPro Plus (DPP) twin. It has the switch built in just like the DP twin but has an added feature for dual tuner receivers. This lnb will allow you to run one line into a DPP separator which has two outputs which go into your dual tuner receiver. Typically the separator...
1-7 of 7 Results
Top