Samsung BD P1500 firmware update - Page 5 - Canadian TV, Computing and Home Theatre Forums

Sucubus · 2009-10-08, 10:55 AM

via USB and so far no problems. I figured I should do it as the unit is still under warranty.

JamesK · 2009-10-08, 12:53 PM

What audio problems are you experiencing? In my BD-P1600, I get occasional bursts of noise, when I'm using the remote. The audio is fine when actually playing the disk. This problem appears to have started when I updated the firmware a couple of months ago. The player connects via HDMI to my Sharp Aquos HDTV and from there via optical cable to my A/V receiver.

PrinceLH · 2009-10-09, 12:28 AM

Now, if we could only get Samsung to do a firmware update on the UP5000, then I would be happy.

Tom.F.1 · 2009-11-06, 08:28 PM

The good news is the Update worked and Crank2 finally played, no problem. The bad news is that was the worst movie i've seen in a long time.

Tom · 2009-11-25, 03:33 PM

I see that firmware 2.5 is out.

Does this support divx?

Tom

Sucubus · 2010-01-31, 08:57 PM

New firmware out. I updated with USB and had no problems.

4thought · 2011-01-03, 12:36 PM

I just tried loading the Oct/10 2.9 firmware via USB. Now nothing plays. If I load a disc, the display shows CLOSE, but the player doesn't react to the play button. Any ideas?

2009-10-08, 10:55 AM	#61
Sucubus Join Date: Aug 2006 Location: Rogers Employee Posts: 83	Firmware installed via USB and so far no problems. I figured I should do it as the unit is still under warranty. __________________ H550, H890, H1, SA8300, SA8300HD, SA940, PS3 SLIM 250GB, Panny TH42PX60U, Prima PS3227, Sammy BDP1500, Toshiba HDA3

2009-11-06, 08:28 PM	#64
Tom.F.1 Veteran Join Date: Jun 2005 Location: Ajax, Ontario Posts: 1,928	The good news is the Update worked and Crank2 finally played, no problem. The bad news is that was the worst movie i've seen in a long time. __________________ Samsung TV, Pio-Elite AVR, OppoBD, Wharfedale Speakers, Kicker Subs. Bell EVu, DB-4e OTA:)

2010-01-31, 08:57 PM	#66
Sucubus Join Date: Aug 2006 Location: Rogers Employee Posts: 83	Firmware version 2.6 now available New firmware out. I updated with USB and had no problems. __________________ H550, H890, H1, SA8300, SA8300HD, SA940, PS3 SLIM 250GB, Panny TH42PX60U, Prima PS3227, Sammy BDP1500, Toshiba HDA3

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

2009-10-08, 12:53 PM	#62
JamesK Veteran Join Date: May 2009 Location: Mississauga Posts: 5,049	What audio problems are you experiencing? In my BD-P1600, I get occasional bursts of noise, when I'm using the remote. The audio is fine when actually playing the disk. This problem appears to have started when I updated the firmware a couple of months ago. The player connects via HDMI to my Sharp Aquos HDTV and from there via optical cable to my A/V receiver.

2009-10-09, 12:28 AM	#63
PrinceLH Join Date: Feb 2009 Location: Belleville. Ontario Posts: 692	Now, if we could only get Samsung to do a firmware update on the UP5000, then I would be happy.

2009-11-25, 03:33 PM	#65
Tom Join Date: Apr 2005 Posts: 37	I see that firmware 2.5 is out. Does this support divx? Tom

2011-01-03, 12:36 PM	#67
4thought Join Date: Jan 2006 Location: Ajax, ON Posts: 48	I just tried loading the Oct/10 2.9 firmware via USB. Now nothing plays. If I load a disc, the display shows CLOSE, but the player doesn't react to the play button. Any ideas?