All Show timer not working with A&EHD? - Canadian TV, Computing and Home Theatre Forums

ltldevl · 2006-12-06, 07:34 AM

Anyone encountering issues with PVR recording timers which are marked for every show eg: All Dog the Bounty Hunter shows on A&EHD? Not refering to VuPass.

Last night I noticed that none of the shows on this channel were marked for recording with the timers I had set. I didn't check to see if any other timers with this trait had the same issue because it seemed that they were all working and the timers picked up all the shows they should have. I did notice numerous timers in my list which were correctly marked for recording in the guide. I tried rebooting with no change. I tried deleting the timer and recreating, and still no recordings were being marked. Could this be an issue with V145 in the 9200? I don't have a second PVR to test, anyone else seeing this? Have not called Bell. I'm trying to avoid a reformat because I have a load of timers.

bubbles · 2009-06-11, 08:18 PM

Just manually set them to record

dosborne · 2009-06-12, 04:55 AM

Pretty much anything over than "daily" or "weekly" is a known problem. The various receiver and firmware threads are filled with "all" and "new" timer posts.

2006-12-06, 07:34 AM	#1
ltldevl Join Date: Dec 2005 Location: Milton, ON Posts: 682	All Show timer not working with A&EHD? Anyone encountering issues with PVR recording timers which are marked for every show eg: All Dog the Bounty Hunter shows on A&EHD? Not refering to VuPass. Last night I noticed that none of the shows on this channel were marked for recording with the timers I had set. I didn't check to see if any other timers with this trait had the same issue because it seemed that they were all working and the timers picked up all the shows they should have. I did notice numerous timers in my list which were correctly marked for recording in the guide. I tried rebooting with no change. I tried deleting the timer and recreating, and still no recordings were being marked. Could this be an issue with V145 in the 9200? I don't have a second PVR to test, anyone else seeing this? Have not called Bell. I'm trying to avoid a reformat because I have a load of timers. __________________ BEV 9242, 6131s \| Samsung HL67A750 \| Pioneer VSX-919AH-K \| Cerwin Vega VE-15s, VE-5C, VE-5M

2009-06-11, 08:18 PM	#2
bubbles Join Date: May 2009 Location: North Delta, BC Posts: 12	Forget VUpass Just manually set them to record

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

2009-06-12, 04:55 AM	#3
dosborne Veteran Join Date: Feb 2007 Location: Ottawa, ON - Sharp Aquos 52" LCD - Bell 9200, 4x5900, 3x3100, E50 DVD-R, Harmony 880, Garmin C550 Posts: 2,814	Pretty much anything over than "daily" or "weekly" is a known problem. The various receiver and firmware threads are filled with "all" and "new" timer posts.