9200 not working with HDMI out. - Canadian TV, Computing and Home Theatre Forums

Geoff · 2005-09-25, 10:29 PM

I've recently purchased a Sanyo Z-3 projector and have discovered an unusual problem with the HDMI out from the 9200.
I need to turn the 9200 off and then on again in order for the projector to either sense a signal or for the 9200 to send a signal out of the HDMI out.
Component works fine .
This is very annoying.
I have found others on the web that have had the same problem with different displays so this is not isolated to my projector/9200 combo.

Has anyone else noticed this problem????

Diamond · 2005-09-25, 11:42 PM

I have mine connected via HDMI and have never had a problem. I have had mine since they were first released.

Geoff · 2005-09-26, 12:47 AM

do you have the same projector or are you talking about the 9200?

Thanks

Marlek · 2005-10-06, 04:25 PM

Interesting... I have the 6100 hooked up to the Z-3 and haven't encountered the problem.

dgwhite · 2005-10-07, 05:31 PM

How does the Z3 look with the 9200? I have the 5200 and watch it with the stretch. Pic quality is good but the stretch annoys me

Thanks

Dialdn · 2005-10-19, 02:56 PM

I have a similar issue with my set-up I just upgraded my projector from a BenQ 6100 to a Panny PT-AE900U. Everything works fine via Component. But, when I use HDMI, the channel appears, goes black for a second and comes back. This happens each time I change channels or use the PVR to go forward and back.

I spoke to my local supplier as well as Panasonic Canada. It seems to be an issue with the 9200 but Bell won't admit it. It is a handshaking issue I guess. I have read others having similar issues with the Dish 942. The suggestion is that it is a bug hopefully a firmware fix will come out of it.

D

I_Want_My_HDTV · 2005-10-20, 01:17 AM

There are issues with HDMI/DVI devices. I get glitches with the 9200 set to 1080i and a Toshiba TV. I also have a DVI monitor that cuts out with an ATI video card. It can only get worse when HDCP is enabled.

Altaman · 2005-10-20, 07:24 AM

Yep had the same problem with an LG upconverting DVD player in that it would not display a picture on my Daytek via DVI. Took the LG back, got a samsung and it worked perfectly. I now have the Samsung hooked up via component and the 6100 hooked up via DVI and they are both working fine.

Alt

Dialdn · 2005-10-20, 09:26 AM

I am going to get a Sony upscaling DVD player today and will use the HDMI cable for that. I will post if there are any problems.

D

Q · 2005-10-20, 01:09 PM

I have had my panasonic S97 dvd player and now my 9200 hooked up to my Toshiba 51H84C HTV with no problems with either.

jvillain · 2005-10-21, 10:55 PM

I have a Sony RP and some timesa DVI works and some times it doesn't. I haven't been able to pin point a combination that always work or a combination that always doesn't. Quite odd.

Interceptor · 2005-10-22, 05:12 AM

My DVI wouldn't work on my 6100 unless I did a reboot every time I started it. Bell told me to leave my receiver on. I got fed up with that and another agent redownloaded my last update and it worked fine until the receiver gave up the ghost.

Battscrew · 2005-10-22, 10:25 AM

I have my 6100 hooked up via DVI for a year - no problems at all. I use a Star something cable from Memory express

Dialdn · 2005-10-25, 11:29 PM

Just a follow-up.

I bought a Sony upscaling DVD player and sending a 1080i signal to Panansonic AE900 using HDMI. No issues at all. Once again pointing to a small HDMI problem.

D

ksaban · 2005-10-26, 08:18 PM

I have the same problem with my 9200 and my Panasonic TH42PD50 Plasma TV.
I have to do a hard reboot of the receiver to get a picture out of HDMI.

If I have my TV running and shut it off, leaving the receiver on, I have a black screen when I turn my TV back on. Seem like it's an HDMI synchronization type issue. I have reported it to Bell Tech support.

2005-09-25, 10:29 PM	#1
Geoff Join Date: Jan 2002 Location: Hamilton , Ont. Posts: 319	9200 not working with HDMI out. I've recently purchased a Sanyo Z-3 projector and have discovered an unusual problem with the HDMI out from the 9200. I need to turn the 9200 off and then on again in order for the projector to either sense a signal or for the 9200 to send a signal out of the HDMI out. Component works fine . This is very annoying. I have found others on the web that have had the same problem with different displays so this is not isolated to my projector/9200 combo. Has anyone else noticed this problem???? __________________ Tramps like us...

2005-09-25, 11:42 PM	#2
Diamond Join Date: Mar 2004 Location: Calgary, Just outside of Canada! Posts: 841	I have mine connected via HDMI and have never had a problem. I have had mine since they were first released. __________________ 5900 on Sony Trinton 24 inch 6100 on Samsung 53 DLP 9200 on Sony KV34XBR910

2005-09-26, 12:47 AM	#3
Geoff Join Date: Jan 2002 Location: Hamilton , Ont. Posts: 319	do you have the same projector or are you talking about the 9200? Thanks __________________ Tramps like us...

2005-10-07, 05:31 PM	#5
dgwhite Join Date: May 2005 Posts: 2	Off topic but... How does the Z3 look with the 9200? I have the 5200 and watch it with the stretch. Pic quality is good but the stretch annoys me Thanks

2005-10-22, 10:25 AM	#13
Battscrew Join Date: Dec 2003 Location: Calgary, just west of the center of the Universe Posts: 1,073	I have my 6100 hooked up via DVI for a year - no problems at all. I use a Star something cable from Memory express __________________ Am I getting new Sony?

2005-10-06, 04:25 PM	#4
Marlek Join Date: Apr 2003 Location: Kingston, ON Posts: 31	Interesting... I have the 6100 hooked up to the Z-3 and haven't encountered the problem.

2005-10-19, 02:56 PM	#6
Dialdn Join Date: Oct 2005 Location: Carp, ON Posts: 21	I have a similar issue with my set-up I just upgraded my projector from a BenQ 6100 to a Panny PT-AE900U. Everything works fine via Component. But, when I use HDMI, the channel appears, goes black for a second and comes back. This happens each time I change channels or use the PVR to go forward and back. I spoke to my local supplier as well as Panasonic Canada. It seems to be an issue with the 9200 but Bell won't admit it. It is a handshaking issue I guess. I have read others having similar issues with the Dish 942. The suggestion is that it is a bug hopefully a firmware fix will come out of it. D

2005-10-20, 01:17 AM	#7
I_Want_My_HDTV . Join Date: Jan 2003 Location: London, ON Posts: 6,297	There are issues with HDMI/DVI devices. I get glitches with the 9200 set to 1080i and a Toshiba TV. I also have a DVI monitor that cuts out with an ATI video card. It can only get worse when HDCP is enabled.

2005-10-20, 07:24 AM	#8
Altaman Join Date: Aug 2004 Location: Calgary, AB Posts: 1,129	Yep had the same problem with an LG upconverting DVD player in that it would not display a picture on my Daytek via DVI. Took the LG back, got a samsung and it worked perfectly. I now have the Samsung hooked up via component and the 6100 hooked up via DVI and they are both working fine. Alt

2005-10-20, 09:26 AM	#9
Dialdn Join Date: Oct 2005 Location: Carp, ON Posts: 21	I am going to get a Sony upscaling DVD player today and will use the HDMI cable for that. I will post if there are any problems. D

2005-10-20, 01:09 PM	#10
Q Veteran Join Date: Dec 2004 Location: Oakville Posts: 3,974	I have had my panasonic S97 dvd player and now my 9200 hooked up to my Toshiba 51H84C HTV with no problems with either.

2005-10-21, 10:55 PM	#11
jvillain ______________ Join Date: Jun 2002 Posts: 1,460	I have a Sony RP and some timesa DVI works and some times it doesn't. I haven't been able to pin point a combination that always work or a combination that always doesn't. Quite odd.

2005-10-22, 05:12 AM	#12
Interceptor Join Date: Sep 2005 Location: Sunshine Coast Posts: 593	My DVI wouldn't work on my 6100 unless I did a reboot every time I started it. Bell told me to leave my receiver on. I got fed up with that and another agent redownloaded my last update and it worked fine until the receiver gave up the ghost.

2005-10-25, 11:29 PM	#14
Dialdn Join Date: Oct 2005 Location: Carp, ON Posts: 21	Just a follow-up. I bought a Sony upscaling DVD player and sending a 1080i signal to Panansonic AE900 using HDMI. No issues at all. Once again pointing to a small HDMI problem. D

2005-10-26, 08:18 PM	#15
ksaban Join Date: Sep 2005 Posts: 9	I have the same problem with my 9200 and my Panasonic TH42PD50 Plasma TV. I have to do a hard reboot of the receiver to get a picture out of HDMI. If I have my TV running and shut it off, leaving the receiver on, I have a black screen when I turn my TV back on. Seem like it's an HDMI synchronization type issue. I have reported it to Bell Tech support.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode