Toshiba 52XV645U, problems with HDMI Audio - Canadian TV, Computing and Home Theatre Forums

Fisherguy · 2010-03-16, 12:05 AM

I have a problem passing audio to my TV using the HDMI inputs.
With my TELUS satellite I use an optical cable for audio but when I connect my laptop to the TV and use the HDMI for audio I get staticky noise after 40-50 minutes, when that happens I just unplug the HDMI from either the TV or laptop, plug it in again and it works fine.
When I set things up so the audio from the satellite goes through the HDMI I get the same noise except it takes longer to happen.

TV is under warranty, the guy came out and updated the software on the TV, told me 90% of the time that cures the problem, if it still hapens they come out and change the main board.
I still have the problem. Repair guy said Toshiba and Samsung have lotsa issues with HDMI's, anyone else heard of this?

Fisherguy · 2010-03-19, 09:29 PM

No one else has had this problem?

Spill · 2010-05-15, 09:38 PM

I was just out looking to see if others had this same problem, and I see that you have. I can fix the problem by either turning off the TV or just changing the input source then changing it back. It's a little annoying, and if it happened more often I'd get something done about it, but it only happens once or twice a day, max.

57 · 2010-05-15, 11:47 PM

Sounds like some sort of firmware issue (perhaps with the laptop since the TV was updated), but here's the HDMI Issues FAQ. Perhaps the tips there or the "things to check" at the bottom will be of some help.

http://www.digitalhome.ca/forum/showthread.php?t=71112

2010-03-16, 12:05 AM	#1
Fisherguy Join Date: Nov 2005 Location: Vancouver area Posts: 215	Toshiba 52XV645U, problems with HDMI Audio I have a problem passing audio to my TV using the HDMI inputs. With my TELUS satellite I use an optical cable for audio but when I connect my laptop to the TV and use the HDMI for audio I get staticky noise after 40-50 minutes, when that happens I just unplug the HDMI from either the TV or laptop, plug it in again and it works fine. When I set things up so the audio from the satellite goes through the HDMI I get the same noise except it takes longer to happen. TV is under warranty, the guy came out and updated the software on the TV, told me 90% of the time that cures the problem, if it still hapens they come out and change the main board. I still have the problem. Repair guy said Toshiba and Samsung have lotsa issues with HDMI's, anyone else heard of this? __________________ Toshiba 55G300U, Denon 2106, 1920; Paradigm Monitor 11's, C370, ADP 370's, PW2200 sub; TELUS SAT, Harmony ONE

2010-03-19, 09:29 PM	#2
Fisherguy Join Date: Nov 2005 Location: Vancouver area Posts: 215	No one else has had this problem? __________________ Toshiba 55G300U, Denon 2106, 1920; Paradigm Monitor 11's, C370, ADP 370's, PW2200 sub; TELUS SAT, Harmony ONE

2010-05-15, 09:38 PM	#3
Spill Rookie Join Date: May 2010 Posts: 1	Same Problem I was just out looking to see if others had this same problem, and I see that you have. I can fix the problem by either turning off the TV or just changing the input source then changing it back. It's a little annoying, and if it happened more often I'd get something done about it, but it only happens once or twice a day, max.

2010-05-15, 11:47 PM	#4
57 Moderator Join Date: May 2002 Location: Toronto, Rogers, 8300HD, eHDD, Panasonic TCP65S1, Denon AVR4310Ci; 8300HD, eHDD & Sony KDL40W3000 Posts: 50,301	Sounds like some sort of firmware issue (perhaps with the laptop since the TV was updated), but here's the HDMI Issues FAQ. Perhaps the tips there or the "things to check" at the bottom will be of some help. http://www.digitalhome.ca/forum/showthread.php?t=71112 __________________ 57's Home Theatre (Latest equipment & photos) 57's Optimization Services (Home Theatre Optimization)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode