Originally Posted by Glenn3
Will it matter if the cable from the power inserter to the switch is say 20' feet long? I want to install the DPP44 in the basement but power it from the main floor.
Also I read my 9242 should be plugged into the power inserter instead of the switch.....dose this port put out more power... Is that why?
The RG6 from the #1 out port of the DPP44 goes to the input of the power inserter which can sit right behind your 9242. Then connect a short section of RG6 from the output of the power inserter to the separator for the 9242.
I am not sure the max. distance for the power inserter but up to 50 ft. should be fine.