|2008-01-22, 11:16 AM||#1|
Join Date: Dec 2004
SW44 switch discussion
Another very common installation is the SW44 switch. It typically uses two inputs from 82 and 2 inputs from 91 which will allow 4 outputs but can also be used with 2 inputs from one sat to output 4 lines like a SW24. This switch also requires a power adaptor to be used.
Some people have said it works without a power adaptor but I personally would not recommend it because your receivers will then need to power the switch and lnb's.
It is an indoor and outdoor switch however needs to be plugged indoors.
Last edited by Q; 2008-02-25 at 03:16 PM. Reason: Changed wording to allow only 2 lines input