Combine 4 LEDs as 'one TV' - Canadian TV, Computing and Home Theatre Forums

jasnb · 2011-08-03, 11:19 AM

Hey Digihome.

Have a question I'm hoping you can help me answer. I'm setting up a visual installation for a friend and they would like to link four flat screen TVs to display a single screen (i.e. each TV displays 1/4 of the total image). This would be running off of a laptop with an HDMI out.

Question is whether a standard 1x4 HDMI splitter would be the solution? Or do I need something more (i.e. specific program on the laptop)?

Thanks!

ScaryBob · 2011-08-03, 12:01 PM

A standard HDMI splitter will not do it. A laptop won't either unless it has some sort of video add on, such as a high end external video card or processor. Some PCIe video cards and software drivers have the capability to handle screens in this way. It may require two video cards for 4 screens. There may also be some high end HDMI video processors that will. They are usually quite expensive compared to DIY PC solutions.

audacity · 2011-08-03, 12:07 PM

Take a look at AMD's Eyefinity feature. I haven't seen any 2x2 configurations though. They have 3x1 and 3x2 configurations in the demos that I've seen.

Civuck · 2011-08-03, 05:17 PM

Quote:

Originally Posted by DancesWithLysol

Take a look at AMD's Eyefinity feature. I haven't seen any 2x2 configurations though. They have 3x1 and 3x2 configurations in the demos that I've seen.

2x2 is supported in Eyefinity. See here.

jasnb · 2011-08-04, 02:30 PM

Thanks for the help so far.

I looked that the AMD solution. I have an old tower I bought for my parents with an AMD processor in it. Going to see whether it supports 'crossfire' so I can buy a couple of Radeon graphics cards and 'connect' them to give me the 4 screens. Otherwise I'm looking at upwards of $1000 for a proper Quad video card.

ScaryBob · 2011-08-04, 02:49 PM

Quote:

Eyefiniy is supported on systems with more than one graphics card. However, each display group must reside on its own video card. For example, a display cannot span across multiple graphics cards.

It looks like a single card that supports 4 displays must be used.

Quote:

For configurations using more than two displays, additional displays must have DisplayPort connectors.

The monitors must accept DisplayPort as well.

Gino Cerullo · 2011-08-04, 03:00 PM

A quad-head video card shouldn't cost $1000. I was looking into those when you asked your question. I saw ATI FireMV and nVidia Quadro cards that supported 4 displays in the ~$500 range.

Gino Cerullo · 2011-08-03, 03:12 PM

I don't think you'll be able to accomplish this with a laptop but you can with a desktop and the correct video cards.

The problem with a laptop is that they only have one video out and even if you connected it to a splitter the splitter would deliver the same video output to all the inputs, essentially you'd be seeing the same source repeated on all four displays. (The exception here is the new MacBooks Pros with 15" or 17" displays and Thunderbolt and two Apple 27" Thunderbolt displays. The MacBook Pros can drive the two displays daisy chained using Thunberbolt cables but the limit is two displays.)

A desktop on the other hand with a couple of video cards with two outputs each or a single video card with four output could handle this easily.

tvlurker · 2011-08-03, 03:18 PM

A laptop with a docking station can handle two external displays, with the laptop screen disabled (or mirroring one of the external displays).

I doubt a docking station could do 2x2, though.

2011-08-03, 11:19 AM	#1
jasnb Rookie Join Date: Aug 2011 Posts: 6	Combine 4 LEDs as 'one TV' Hey Digihome. Have a question I'm hoping you can help me answer. I'm setting up a visual installation for a friend and they would like to link four flat screen TVs to display a single screen (i.e. each TV displays 1/4 of the total image). This would be running off of a laptop with an HDMI out. Question is whether a standard 1x4 HDMI splitter would be the solution? Or do I need something more (i.e. specific program on the laptop)? Thanks!

2011-08-03, 12:01 PM	#2
ScaryBob Veteran Join Date: Feb 2009 Location: The Dandelion City Posts: 7,133	A standard HDMI splitter will not do it. A laptop won't either unless it has some sort of video add on, such as a high end external video card or processor. Some PCIe video cards and software drivers have the capability to handle screens in this way. It may require two video cards for 4 screens. There may also be some high end HDMI video processors that will. They are usually quite expensive compared to DIY PC solutions. __________________ At 20 I had a good mind. At 40 I had money. At 60 I've lost my mind and my money. Oh, to be 20 again. --Scary

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

2011-08-03, 12:07 PM	#3
audacity Veteran Join Date: Jan 2009 Location: 127.0.0.1 Posts: 1,800	Take a look at AMD's Eyefinity feature. I haven't seen any 2x2 configurations though. They have 3x1 and 3x2 configurations in the demos that I've seen.

2011-08-04, 02:30 PM	#5
jasnb Rookie Join Date: Aug 2011 Posts: 6	Thanks for the help so far. I looked that the AMD solution. I have an old tower I bought for my parents with an AMD processor in it. Going to see whether it supports 'crossfire' so I can buy a couple of Radeon graphics cards and 'connect' them to give me the 4 screens. Otherwise I'm looking at upwards of $1000 for a proper Quad video card.

2011-08-04, 03:00 PM	#7
Gino Cerullo Join Date: Nov 2003 Location: Toronto, ON Posts: 582	A quad-head video card shouldn't cost $1000. I was looking into those when you asked your question. I saw ATI FireMV and nVidia Quadro cards that supported 4 displays in the ~$500 range.

2011-08-03, 03:12 PM	#8
Gino Cerullo Join Date: Nov 2003 Location: Toronto, ON Posts: 582	I don't think you'll be able to accomplish this with a laptop but you can with a desktop and the correct video cards. The problem with a laptop is that they only have one video out and even if you connected it to a splitter the splitter would deliver the same video output to all the inputs, essentially you'd be seeing the same source repeated on all four displays. (The exception here is the new MacBooks Pros with 15" or 17" displays and Thunderbolt and two Apple 27" Thunderbolt displays. The MacBook Pros can drive the two displays daisy chained using Thunberbolt cables but the limit is two displays.) A desktop on the other hand with a couple of video cards with two outputs each or a single video card with four output could handle this easily.

2011-08-03, 03:18 PM	#9
tvlurker Veteran Join Date: Jul 2005 Location: Craig Henry (Greenbank/Hunt Club), Nepean, ON Posts: 2,729	A laptop with a docking station can handle two external displays, with the laptop screen disabled (or mirroring one of the external displays). I doubt a docking station could do 2x2, though.