Hey all, i just recieved a 9200 for christmas up from the 6100 model, and my channels are "fuzzier" then normal. On the 6100 HD was picture perfect, while with the 9200 HD has what i can best descirbe as "digital noise" on the channels, (you can see the quality issues with high definition football the most, the first down line on tv is a fuzzy yellow line)

I have made sure its on 720p and or 1080i. Also the 2nd television in the spare bedroom is crystal clear, buts it not an HD television. My stepdad istalled it and was told it was NOT nessecary to install the power insterter in the house by a bell csr.

I'm hoping this isnt normal quality for the 9200..

Also , signal strength is usually around 80-82

Thanks for helping :)

Have a look at the following Digital Home FAQs (under help).

- Things to check first
- What you need to do to your new HDTV.

Perhaps something there will help.

If you are using an SW44 for a switch then yes you should be using the power inserter - if you are using 2 - sw21 - then no inserter required.

Check your cable connections - perhaps they are the problem.