I am getting great 100% signal strength and can watch CTV Ottawa CJOH on 13.1 from Hauppauge WinTV and TSReader but not from 7mc.

if somebody can spot something wrong in the Psip it would be great !
Program Association Table
PAT Version Number: 1
Transport Stream ID: 17201 (0x4331)

PMT PID 48 (0x0030) - Program 1 CJOH EIT Link

Program Map Table(s)
Program Number: 1 CJOH
Descriptor: ATSC Component Name Descriptor
Component Name:
PCR PID: 0x0031




Stream Type: 0x02 MPEG-2 Video PID 49 (0x0031)
MPEG Video: Bitrate 16.808 Mbps Resolution 1920 x 1080i
MPEG Video: Framerate 29.97 fps Aspect Ratio 16:9 Chroma Format 4:2:0
Descriptor: Data Stream Alignment Descriptor
Alignment type: video access unit

Stream Type: 0x81 AC-3 Audio PID 51 (0x0033)
AC3: Bitrate 384 Kbps Sample Rate 48 KHz
AC3: Mode complete main Coding 3/2 5 L, C, R, SL, SR
Descriptor: Registration Descriptor
Format identifier: 0x41432d33 (AC-3)
Descriptor: ATSC Component Name Descriptor
Component Name: Primary Audio
Descriptor: ATSC AC-3 audio Descriptor
ATSC AC3 Descriptor
Descriptor: ISO639 Language Descriptor
Language: eng
Audio type: undefined

Stream Type: 0x81 AC-3 Audio PID 52 (0x0034)
AC3: Bitrate 384 Kbps Sample Rate 48 KHz
AC3: Mode complete main Coding 2/0 L, R
Descriptor: Registration Descriptor
Format identifier: 0x41432d33 (AC-3)
Descriptor: ATSC Component Name Descriptor
Component Name: Secondary Audio
Descriptor: ATSC AC-3 audio Descriptor
ATSC AC3 Descriptor
Descriptor: ISO639 Language Descriptor
Language: enm
Audio type: undefined

Stream Type: 0x05 ISO/IEC 13818-1 private_sections PID 273 (0x0111)

Stream Type: 0x06 ISO/IEC 13818-1 PES packets containing private data PID 272 (0x0110)

Terrestrial Virtual Channel Table
Channel 1
Service Name: CJOH
TSID: 17201 (0x4331)
Channel Number: 13.1
Carrier Frequency: 210
Modulation Mode: ATSC (8 VSB)
Source ID: 1
Descriptor: ATSC Service Location Descriptor
Service Location Descriptor:
PCR PID 0x0031
Stream Type 0x02 (MPEG-2 Video) ESPID = 0x0031 Language =
Stream Type 0x81 (AC-3 Audio) ESPID = 0x0033 Language = eng
Stream Type 0x81 (AC-3 Audio) ESPID = 0x0034 Language = eng

Event Information Table
Channel 1
Service Name: CJOH
Provider Name:
Transport Stream ID: 17201 (0x4331)

---------------------------------------------

I added CJOH to WMC manually when it didn't scan.

Tasks > Settings > TV > Guide > Add Missing Channels

Afterwards move back up to the Guide level and you can edit 13-1 and edit the listings to copy the EPG data from 13 to 13-1.

http://www.digitalhome.ca/forum/showthread.php?t=110789

I added CJOH manually. It works for viewing but when i try recording it craps out. So I removed it and will try to see why it's not scanning. I suspect it's another PSIP issue as we have seen with Global.

Flavoie,

I tried adding it manually. It works for me. I recorded a live stream and I also scheduled a recording without issue.

I thought I would try adding global again manually...no dice.

I wonder if it has something to do with analog channel conflicts with the media center system.

ie....the listings include analog 6 and analog 13 RF...even if you remove them from the guide it still thinks they are there.

I was wondering what would happen if zap2it updated listing data for 13662 zip code to remove the conflict if that might resolve the issue.

Maybe I will try the guide setup again without my analog tuner.

Thanks mike ! I tried and tried again, it turns out i was not patient enough.

The first few times I either clicked on the Record button during live TV or for making a scheduled recording from the guide while live TV was running, I would get an hourglass, for what it seemed like forever. This time I just waited it out. It might have taken 20 minutes but it finished gracefully. It took a long time a few times, but now when I hit record it is fast/normal.

So i'm good with SRC and CTV added manually.