so i have the HD and SD box recognizing the switch now (it shows it as "installed switch model DPP twin")... so i'm pretty sure this is the correct LNB
now, i still have a problem though... i am locked on 82 at 100%, but can't find 91 in the sky at all! so i have the HD channels showing on the HD box, and of course nothing is showing on the SD box.... this is how it should be though correct? if i only have 82 locked and not 91, i would only be getting HD channels correct? on the HD box, when i go to system setupm it has the 82 locked and at around 95%, but it shows 0% for the 91
the way i understand skewing is that you lock onto 91, and then as you move your skew, the 91 LNB stays centered, and your simply searching for 82 at that point... my problem is that i can't find 91 to begin with
from my location, 91 should be at almost the exact elevation (0.5 degrees difference) and only slightly off to the south from 82, but its just not there... is there something about this switch/twin-LNB that would disallow me from finding 91?
thanks for any help